Alpine Snowboarding by: Jakob Jelling


Alpine snowboarding is for those of you who are a little more extreme about speed than most.

Alpine snowboarding encompasses more than just speed. Other areas often included are racing

and extreme carving.


Alpine snowboards are uniquely designed for their purpose. An alpine snowboard has a longer,

narrower and stiffer construction than any other snowboards. This design allows for higher

speeds, very sharp turning, and aggressive edge holding power on hard snow and excellent high-

speed stability.


Alpine snowboarding is generally done on hard packed snow or groomed runs. Hard packed

snow usually isn't good for snowboarding but is exceptional for high speeds, the heart of alpine

snowboarding. With other styles of snowboards maneuverability is impossible on this type of

terrain. Thanks to the aggressiveness of the edge of the alpine snowboard, fast, snappy control is

the least of your problems.


Since the riding is so different from other types of snowboarding it only stands to reason that the

gear would also be slightly different from normal. The gear for alpine snowboarding resembles

skiing equipment more than it does snowboarding equipment.


In order to protect the rider and maximize control at high speeds an alpine snowboarder will use

the following things. First is a helmet and eye protection. Thanks to the laws of physics we know

that a hard surface becomes even harder at higher speeds. This means that a helmet and eye

protection are an absolute must if you wish to stay safe when ripping down a hill at blazingly fast

speeds as the impact from any mishap can be more than normal.


The next thing to consider is your boots. You must use a hard-shelled boot that resembles a

skiing boot. Since the speeds on an alpine snowboard are so much higher the forces required to

maintain a tight turn are also higher. In order to make shape-cornering possible you must use a

hard-shelled boot to leverage your power with the snowboard.


After thinking of your boots you must also think of the stance that you wish to use when riding

your alpine snowboard. There is basically only one choice but there are subtle variations for

each rider. Traditionally the front foot should be set at about +70' and the rear foot at about

+35'. With the advance of technology and the improvements of the snowboards the degree of

the feet has become less important. More commonly the stance is determined by the width of

the board as long as there is a difference of at least 5'.


Any interesting thing to note is that alpine snowboarding has seemed to have died off and been

reborn again. Alpine board manufactures took the design of the alpine board to a point that it

was amazingly perfect at high speeds but no longer usable for the average person. One main

way of improving the snowboard efficiency was to reduce its width to as little as 16 cm in the

center of the snowboard. This did allow for even greater speeds but caused the snowboard to

become unstable at low speed and forced the rider to remain in a position that was

uncomfortable to ride in for any length of time.


These innovations seemed to kill the industry as did skiing manufactures that started to

implement the aggressive edge technology into their products. Most people began to shy away

from alpine snowboarding and instead seek out freestyle snowboarding. However this has



changed recently with the rebirth of alpine snowboarding. Once again people are becoming

interested in the challenge and excitement that comes from ripping down a hill at high speeds

and pulling turns that exert more g-forces on the body than most cars do. Manufacturers have

learned their lessons and seem to be much more reasonable and consumer oriented in their

snowboard designs than before.


If you are a snowboarder who enjoys speed and tight cornering then alpine snowboarding is the

thing for you. Alpine snowboards are designed to be ridden hard and fast on machine groomed

or packed runs. Their design allows you to move in ways no other snowboarder and possibly

skier can ever hope to. Also, alpine snowboarding is easier to learn than alpine skiing. If you are

looking for fast paced action filled fun like nothing else than you are destined for alpine

snowboarding. Have fun, keep your speeds up and enjoy the g-forces of the mind blowing

cornering.




About The Author
Jakob Jelling is the founder of http://www.snowboardinghelp.com/. Please visit his website to discover the world of snowboarding!

6 Steps To Buying The Right Snowboard Boots

One of the most important pieces of equipment of snowboarding is your snowboard boots. They

are your connection to the snowboard, by not spending time in finding the right boots; you can

ruin your snowboarding experience. some quick tips for buying boots.


Should I buy Step in or Strap in boots...


The first decision is if you want the traditional strap-in boots or the newer step-in boots. If you

decide to go for the step-in boots you will have to buy the bindings and boots together, this is

because the strap-in boots will not work with the step-in binding. The trend at the moment

seems to be softer boots with strap-in bindings.


the fit of the boots...


No matter how much you have to spend on boots it is very important that you take time finding

the best fitting boots. If you buy boots that are comfortable in the shop you will find aching feet

on the slope. So find boots that are snug. Remember be patient. Different brands of boots suit

different types of feet. So go forth and find your boots.


Trying On Boots... Here are a few things to remember when trying on your boots. Firstly wear

proper socks. Put on a boot and push your heel into the back of the boot to make sure that your

foot is secure. Then tie the boots laces tight but not too tight. Then close the outer lining of the

boot, repeat the process with the other boot. Attach the bindings and stand up. Notice how

secure your feet are, move forwards and backwards making sure there is no rubbing that may

cause you discomfort later on.


heel lift... Heel Lift is when you lean forward in your boots and your heel lifts and not your

snowboard. But this will be minimized if you find the best boots for your feet.


Inner Boots... There are many advantages of having inner boots or lining, usually the inner boots

can be laced like the outer boots, and they provide a little extra stability on the slope. You can

take the inner boot out to dry after a long day snowboarding.


Some Boots have additional features... As you search for the perfect pair of boots you will notice

that as the price for boots goes higher with the features. For example air-pumps. All you must

remember is that these features are useless if the boots don?t fit you in the first place.


Robert Is A Freelance Writer For Snowboardhype.com. They Specialize In Information About

Snowboarding. No Matter What Kind Of Snowboard Gear You Are Looking For You can Find

Information About Here.


Article Source: Article Hub

Hit the Slopes: Dreamy Snowboarding Vacations
' name=input136051>

Sports

The Thrill of Snowboarding Snowboarding, the art of gliding across snowy slopes on a single

elongated board, has become highly popular among lovers of winter sports. Even those who

don’t like the cold, but love the thrill of physical activity, have found joy in snowboarding. No

matter where in the world you live, there is a dreamy snowboarding location nearby. Before

you plan your next vacation, you may want to consider the condition of the slopes.


Snowboarding Resorts The nation is peppered with resorts that offer snowboarding lessons, to

suit any vacation plan. You’ll find snowboarding resorts in states across the US, if you know

where to look. In Canada, Lake Louise and Whistler are two highly popular spots for

snowboarding and snowboarding lessons. California’s Squaw Valley is a great, dreamy

snowboarding vacation resort for those wishing to learn the craft of snowboarding. Sun Valley in

Idaho, and Moonlight Basin in Montana are popular Rocky Mountain snowboarding vacation

destinations.
In Nevada, Heavenly is the best resort for snowboarding, and Jackson Hole is where you want

to go if Wyoming is the state of your choice. If the resort you choose features snowboarding,

there will be a bevy of other winter sports to enjoy as well. Amid lush mountain scenery and

crisp white snow, you may discover that snowboarding is the answer to your dream vacation.


Utah is filled with great resorts; where you can do all the snowboarding you please and even

receive lessons. Deer Valley, The Canyons, Snowbird, and Park City are all well-known and

beautiful resorts that you might want to check out if you’re visiting Utah. For snowboarding,

you can hardly do better than the beautiful peaks of Utah.
Unless, of course, you go to Colorado. The US capital of winter resorts, Colorado is known for

their famous resorts…and their beautiful snow. No matter what winter activity you wish to

engage in, this is one of the best places to go. Aspen is probably the most well-known of Colorado

snowboarding and skiing hotspots. Other Colorado vacation locales include Snowmass, Copper

Mountain, Crested Butte, Keystone, Breckenridge, Telluride, Steamboat Springs, Vail, Winter

Park, and Beaver Creek.
A Dreamy Snowboarding Vacation To have the perfect snowboarding vacation, location is

important. But the willingness to try something new is also a must when it comes to snowboarding. Snowboarding is a sport that can be very thrilling and exciting, but also

dangerous – so be sure to have all the right gear and take all the proper precautions.

Inexperienced snowboarders should receive instruction from experts for safety’s sake. With

proper instruction, snowboarding can be one of the greatest life experiences. A snowboarding

vacation is not just a trip to a snowy land, but a true adventure.


Consider where you will go, and be sure to take all the equipment and gear you need for your

dreamy snowboarding vacation. Proper planning is a must, so try to leave snowboarding lessons

pre-arranged if they are needed. Once you get to your snowboarding vacation destination, you

don’t want to waste any time. You want to get out there and hit the slopes right away, and get

boarding out in the snow. So get everything ready beforehand, to get your dreamy

snowboarding vacation off and running right away.


If you’re planning a snowboarding vacation, then you’re in for a lot of fun and excitement.

Remember to stay safe, your dreamy snowboarding vacation will be a dream come true.


Sara Smith is an avid snowboarder. She has enjoyed snowboarding for years, and when not on a snowboarding vacation she can be found writing about snowboarding history and reading up about the latest tricks.

SNOWBOARDING TRICKS

Do you want to learn some snowboarding tricks? You have learned all of the basic moves and

you can ride downhill without falling down too much. It is time you learned some snowboarding

tricks. Once you learn a few basics you will be ready to take on even bigger challenges and

harder moves. The Fakie, the Ollie, and the Nollie are some of the most basic snowboarding

tricks and can be used in combination with other moves.

The Fakie is a fairly simple move in and of itself, but it can be used to make a lot of other

snowboarding tricks more difficult. Some people might confuse this move with being “goofy

footed” but it is not the same. A fakie is done by switching which foot is on the front of the

board. If you normally have your left foot on the front (most people do) then you would swing

the board or your body around so that your right foot was in front. People who are “goofy

footed” normally have their right foot at the front of the board.

The Ollie is also used in many other snowboarding tricks. It is basically a jump. In order to

complete the ollie, you need to first build up speed. (Speed is the key to many snowboarding

tricks.) Then, crouch down. When you get near the top of the hill or ramp, you shift your weight

to the back of the board and lift up quickly on your front foot. Straighten your legs in the air,

but let them bend when you land for more stability.

The Nollie is very similar to the ollie but instead of shifting your weight to the back of the board,

you shift it to the front. Get going fairly fast, ride forward on your uphill rail and crouch low.

Lean your body forward until you are almost falling and then in what may seem like one motion,

lift up your back foot quickly, pop up your front foot and lift the board with your front leg. Keep

your body centered and land right over the board with knees bent.


Eriani Doyel writes articles about Recreation and Sports. For more information about

Snowboarding Tricks visit fakiesnowboarding.com.

Article Source: http://EzineArticles.com/?expert=Eriani_Doyel

Snowboard Titles

Snowboarding - Selecting The Right SnowboardBy Mike Singh

There are several aspects to consider when selecting your snowboard. Beginners have fewer options than more advanced snowboarders. Novices should start snowboarding using a shorter rather than longer board. This will provide easier control until they become more experienced and competent. Determining what style of snowboarding you enjoy will also make a difference when selecting your snowboard.
Length
The snowboard should come to between your chest and your nose when stood up on its end. The newer the boarder, the shorter the board should be. For tricks like spins a grabs selecting a snowboard that is shorter will be more beneficial than a longer board. Adult boards are usually 130 to 160 cm and children’s boards are typically 110 to 140 cm. More advanced boarders can opt for longer boards that increase speed and stability on rougher terrain.
Generally, the more you weight the longer the board should be. This aspect should be kept in mind when selecting your snowboard. People weighing 100 pounds should stay with the shorter boards, and those weighing over 200 lbs should select a longer board.
Width
It is crucial to make sure that your toes or heels do not hang over the edges of the snowboard. If they do they will increase drag and make controlling the board very difficult. If your feet are larger than a size 11 or over you will have to go with a wider board. These are available at most retailers or can be special ordered.
Core
The core of the snowboard can be made of several different materials ranging from wood to composite materials. There may be a difference in price based on the composition of the core. Wood is generally considered the best core for beginning snowboarders as it is more durable.
It is advisable to get some reviews on different boards before deciding which one to buy. Asking friends and other snowboarders their opinions before buying is a good option. Contact local retailers and ask questions. Some ski and snowboard areas rent equipment by the day. Renting a variety of boards is one way of trying them out prior to selecting the right one for you.
Mike Singh is the publisher of http://www.winter-sportz.com/ On his website, he provides additional articles about the ski vacations in colorado and snowboard protective gear.
Article Source: http://EzineArticles.com/?expert=Mike_Singh

SNOWBOARDING @ NIGHT

Snowboarding at night
Summary:Nighttime snowboarding is another aspect of snowboarding that is unlike any other that you may have tried so far.
Details or Sample: Nighttime snowboarding is another aspect of snowboarding that is unlike any other that you may have tried so far. Many people find snowboarding at night to be very relaxing, exciting and offer a new perspective on hills that they are constantly riding. On of the most important aspects of nighttime snowboarding is being very familiar with the run you are about to ride. Ideally you should know your path so well that you can visualize each corner, the time it takes to get from one turn to the next and what obstacles are where on the trail when you close your eyes. This familiarity will help to offset your lack of vision. Regardless of how well you know the run you are about to attempt, you will be in for a surprise the first time you try it at night. In the dark everything looks different and feels different. You may not have realized how much youre relied on visual cues for when and where to turn slow down or speed up. You will not longer be able to see the stump that marks the start of the moguls or other trail details and shadows will make things seem to appear or disappear. When it comes to night riding you have three options to improve your sight. You can use your eyes and no light, ride a mildly lighted trail or use a headlamp to light your way. You will have to try each option to determine which method is best suited for you. Regardless of which method you wish to use, you must work to improve your night vision. The first step is to allow your eyes to adjust to the dark. Your eyes will under go a chemical change to allow you to see better in the dark and this process takes time, usually about 30 minutes. During this time it is best to sit and wait for it to happen. While waiting, and afterwards, be very careful not to look at any man made light source. Doing so will kill your night vision and you will have to wait another 30 minutes to get it back. If you find you must look at a light, close and cover one eye so that it doesnt loose its night vision ability. Something that most people do not realize is that their daytime activities also effect their nighttime vision. Studies conducted on pilots show that exposure to bright sunlight, especially for 10 days or more, can reduce your nighttime vision, range and clarity by 50 percent. You may wish to wear gray full spectrum sunglasses on the day or the days leading up to the night that you wish to snowboard in order to maximize your night vision. The other option available is to use a headlamp of some kind. The first choice most people think of is a bright white light. While this does allow you to see the colors of your surroundings, it isnt the best choice for nighttime viewing. The second option that most people think of is a red bulb. This too isnt a good idea as red is the first spectrum of light to become invisible at night. The range of a red light at night is very limited and thus you will not be able to see the details that you need to see. Perhaps the best choice for a light is a yellow-green LED light. Often you can insert a suitable LED into the socket of the regular bulb on your headlamp. Yellow-green makes a very good choice for nighttime riding as it will illuminate your surroundings and allow you to see the most detail possible. However a blue-green LED also has its advantages. While a yellow-green light helps activate the cones in your retina to see details, a blue-green light is fairly dim and works with the rods in your retina. The rods are the parts of your eyes responsible for allowing you to see at night. If you are in a fully dark area then blue-green is a better choice since it does not hinder your night vision ability. Nighttime snowboarding is a very fun and interesting experience that should not be missed. You will find that you will discover all kinds of things about your favorite runs and yourself while doing so. Make a point of trying it the next time you find yourself becoming bored with your favorite hill. Jakob Jelling is the founder of http://www.snowboardinghelp.com. Please visit his website to discover the world of snowboarding!

BIG BEAR

Visit Big Bear California
CategoriesTravel Year Round Wonderland
Less than two hours by car from Los Angeles sit the year round playgrounds Big Bear Lake and Big Bear City. Situated in the San Bernardino National Forest at approximately 7,000 feet above sea level, Big Bear provides activities for all four seasons. Whether you are into camping, fishing, boating, water skiing, jet skiing, swimming, hiking, parasailing, horseback riding, mountain biking, skiing, snowboarding, ice skating, bobsleding, playing in the snow, shopping or even just relaxing, you can do it in Big Bear and you can do it in clean fresh air, in gorgeous surroundings and in accomodations that range from unimproved campgrounds to top of the line hotels or spas. Big Bear Lake is a freshwater lake, with approximately 22 miles of shoreline, set amoung forests of pine and oak. The lake is well stocked with trout, large and small mouth bass, blue gill, crappie, and catfish. There are several marinas and two public launches. You can rent sail or motor boats, or you can bring and launch your own boat. Meadow Park (800)448-5335, on the lake, provides a swim beach area as well as shaded picnic areas, barbecues, horseshoe pits, tennis courts, playground equipment, softball fields, and a sand volleyball court. Holloway's Marina and RV Park (800)448-5335, offers lakeshore RV camping with all the amenities including, large level sites, full hook-ups, cable tv, restrooms and hotwater showers, a full service marina, rentals of fishing boats, pontoon boats, jet skis, windsurfers, sail boats, canoes and kayaks, paddle boats, water skis, fishing gear and more, a complete bait and tackle shop, a launch ramp and more. You might also want to check out Big Bear Shores RV Resort (909) 866-4151, a gate guarded resort complete with a 16,000 square foot mountain lodge, forty-slip marina, boat launching ramp, tennis, swimming pool, spas and a fully equipped private health club, the resort offers all the refinements of an exclusive country club. There are also numerous hotels, lodges, cabins and condos for rent, on or near the lake. Big Bear boasts two excellent ski resorts, Snow summit and Bear Mountain Resort. Between the two of them you will find 75 trails, 20 lifts, four high-speed chairs, and seven snowboard parks for all levels of skill. Big Bear also has numerous, beautiful, groomed, cross country ski trails. If you don't know how to ski, don't worry, there are plenty of instructors. If you don't have equipment, don't worry, there are plenty of places where you can rent or buy your equipment. Big bear is not just a winter wonderland, it is a year round wonderland. At Big Bear, you will find beautiful scenery, clean mountain air, plenty of things to do, friendly people and much more. For more information about the city of Big Bear, California see: http://bigbearlake.usacitydirectories.com/, a directory of links to the city of Big Bear, California guides and directories listing hotels, restaurants, attorneys, real estate brokers, information, resources, services, things to do, places to go and more. About the Author David G. Hallstrom, Sr. is a retired private investigator and is currently the publisher of several internet directories, including http://www.usacitydirectories.com/ a directory of national, state, county and city guides and directories listing local guides, directories, web sites and web pages providing resources, services and information about things to do and places to go.Article Source: http://www.LinkSnoop.com

Snowboarding Video

poll top ten snowboarding destinations

what is your favourite snowboarding destination?

let me know why?

snowboarding safety

JEREMY HIER Published 08/17/2005 Nature and Outdoors Unrated
Snowboard Safety: Common Injuries and Treatment
-->
Common Snowboarding Injuries
Snowboarding injuries occur mostly in the upper extremities of the body and the ankle, the most common being sprains followed by fractures and contusions. Upper body injuries are common as snowboarders usually fall forwards or backwards. With a forward fall, snowboarders will protect themselves by stretching their arms outwards to stop themselves from falling. This leads to sprained wrists, wrist fractures, elbow, shoulder and head injuries. If a snowboarder falls backwards mild head as well as coccygeal injuries can occur such as bruising to the tailbone. When they fall snowboarders are advised to try and keep their arms tucked in and to roll with the fall therefore distributing the impact of the fall over a larger portion of their body. It is better to rather have body bruises than a fractured wrist!
Lower body injuries are rare and occur mostly in the ankle and knee area. This is due to the feet being strapped into the board and both feet pointing in the same direction, which localizes knee movement and prevents twisting. However, as the level of snowboarding expertise increases so does the risk of knee injury due to the frequency of aerial maneuvers and the use of hard boots. Aerial maneuvers also present more abdominal, chest, spine and head injuries. Ankle injuries are very common such as sprained and fractured ankles, also known as snowboarders ankle. Contusions are common on the head, face, chest, abdomen and pelvis, lacerations on the head and face and dislocations in the upper extremities. Severe head and spinal injuries have occurred when snowboarders have lost control of their board at high speed.
It is important to note that a fracture of the lateral process of the talus (LPT) can masquerade as an ankle sprain and is frequently undetected on plain x - rays.
Misdiagnosis of this fracture may lead to severe degeneration of the joint, disability and pain.
How to Tell if Your Injury is Serious
There are various symptoms that suggest what type of injury you have and what should be done to heal it. Swelling is a definite sign of an injury and shouldnt be ignored.
It usually occurs around a joint and causes pain and reduced range of motion. Tenderness will be found if you press the injured body part with your finger. Weakness in the injured area can occur as well as numbing and tingling, which are often related to nerve compression and should never be ignored as they may be signaling a serious injury.
How to Treat Any Sprain
If you have sprained your wrist, ankle or knee RICE (Rest, Ice, Compression, Elevation, Exercise) is the safest and easiest way for anyone to heal an injury. It is important to follow these steps, as swelling can cause pain and loss of motion which will limit the use of the muscle, resulting in the weakening, shortening and delayed healing of the injured limb. After following RICE it is advisable to visit a physician for a proper diagnosis of the injury.
Rest
You should rest the sprained limb for 24 48 hours post injury.
Ice
Ice should be used to reduce swelling and pain, and should not be applied for
more than 10 to 15 minutes at a time.
If you do not have ice on hand, you can use anything frozen such as a bag of frozen peas.
Never apply heat to an injury as this will increase swelling!
Compression
There are various options for compression:
Elasticated tubular bandage (Tubigrip) which can be strapped either single or doubled over. This should not be worn too tight as it may lead to thrombosis.
Crepe bandage
Elastoplast strapping
Elevation
Elevate the sprained limb horizontally to decrease swelling and discomfort.
Exercise
As soon as symptoms allow gently exercise the injured limb.

Prevention and Protection
Snowboarding injuries can be prevented by following a number of safety precautions.
A fitness programme is essential to train the body for the maneuverability needed for snowboarding. Taking a few snowboarding lessons and having a good instructor helps to minimize the number of injuries that occur, teaches you how to snowboard effectively and what gear must be worn for your safety. The most important of injury prevention is wearing the right protective equipment. There are different types of gear that are specifically designed to protect certain areas of the body.
Helmets
Helmets are very important in preventing head injury as it is common for snowboarders to fall and injure their heads. There are different types of helmets from lightweight to heavyweight, with venting or no venting, with or without ear flaps, as well as different styles. It is important to choose a helmet that fits you snuggly, is comfortable and not too heavy.
Boots
There are three kinds of snowboarding boots that differ in the support they give to the ankle and foot. Soft boots are used by most snowboarders and offer sufficient stability and flexibility. Hard boots are usually worn by racers and provide ample ankle support.
Hybrid boots have the support of hard boots with the comfort and maneuverability of soft boots. It is important to choose the right footwear for the particular snowboarding activity that you will undertake, i.e. beginner, racer, etc. as each of these boots place the body under different injury risks. Soft boots present twice the risk of ankle injury compared to hard boots due to their moderate ankle support, however hard boots present twice the risk of knee injury than soft boots because they offer less movement. Hiking boots must never be used as they can lead to serious injury. It is important to note that boots and bindings must be bought together as the choice of boots depends on what type of bindings you want to use such as step in bindings or strap bindings.
Wrist and Elbow guards
Wrist guards help support the wrist and are available in different styles for over and inside the glove as well as integrated into the glove. Wrist guards used for inline skating and skateboarding can also be used for snowboarding. Elbow guards help to protect the elbows from bruising and fractures.
Knee and tailbone pads
Knee pads help to protect the knees from bruising, and should be worn if you have weak knee caps. Tailbone pads help to protect the tailbone and should be worn with beginners, as they frequently fall backwards.

Padded jackets and pants
Padded jackets and pants help to prevent other parts of the body from bruising.
Goggles
Goggles help to keep the snow and wind out of your eyes. They also protect the eyes from the harmful rays of the sun which are also reflected by the snow.
If you are wearing a helmet and goggles make sure that the goggles fit comfortably with the helmet.
Follow these snowboard safety tips and you will have the ultimate pain free snowboarding experience!
Find out more about

snowboard safety
plus read about snowboard equipment
that will keep you safe and having fun

Pants...

Snowboarding Pants by: Jakob Jelling
Baggie pants can be more than just fashionable.
Do you remember the days of having to put a snowsuit on in order to go out sledding or skiing? No matter what you did the snowsuit would always climb, let snow in, get wet and usually was uncomfortable because your pants where bunched up inside. Fortunately for those of us who can remember that, those days are long gone.
Modern snowboarding pants, and even regular snow pants, have vastly improved over what we might remember. Snowboarding pants are now worn like regular pants, thinner, lighter, tougher and warmer than ever before. Of course this is only possible thanks to demand and technological advances.
When thinking about snowboarding pants it helps to understand how they work. Generally snowboarding pants use a three-layer system. Some may only have two layers and are either inteended for very mild climates or to be worn over some type of underpants.
The first layer is the base layer and it is in direct contact with your skin. When riding outside you will heat up very quickly and then cool down while on the lift before repeating the process. The purpose of the base layer is to ensure that this can be done without you getting cold. The main reason you get too cold is because your sweat gets caught in the base layer against your skin and begins to freeze. A modern base material will prevent this by wicking the moisture away while providing some temperature balancing benefits.
The next layer is the insulation layer. The purpose of the insulation layer is to retain your body heat and the best way to do so is by trapping a layer of air around your body. This air will greatly decrease the heat exchange between your body and the outside world.
Generally the insulation layer mostly consists of polyesters. The most popular materials are fleece, bunting and pile. Fleece is the most common material and is a dense fabric that has been raked on one side to make the ends of the fibers stand up and trap the air. Bunting is a fleece that has been raked on both sides creating a tight solid weave with wooly air retaining surfaces on both sides. Pile is a single-sided fleece that has undergone more raking and has been processed further to create a much thicker open fabric.
The final layer is the outer shell, which is the only layer with direct contact to the outside world. The purpose of this layer is to protect against wind, rain and snow while letting moisture escape and protect the wearer from cuts, scrapes and chaffing. This layer is made from a material, such as Gore-Tex, which has holes that allow water vapor from your body to escape but are too small to allow a large drop of water in.
Now that you know how the products works you can begin shopping. After determining the number of layers you require you must look for other features. If you like to ride at night or in the dusk you may want reflective strips. For security you may wish to have inside zippered pockets. Large pockets are great for packing around food and water and a see through pocket is great for you lift pass.
If you keep in mind your snowboarding style, needs and what products are available you are sure to get the correct snowboarding pants. Having the correct gear goes a long ways towards maximizing your comfort and enjoyment while snowboarding. Have fun and stay warm.
About The Author
Jakob Jelling is the founder of http://www.snowboardinghelp.com. Please visit his website to discover the world of snowboarding!

Snowboarding Isn’t Just For Kids Anymore by: Lauren Traub Teton

Pain and injury avoidance techniques for snowboarding are invaluable but not well known. If you know how, you can avoid the two biggest mistakes that first time snowboarders make. A positive experience your first few times out will make you more likely to stick out the hard times until you learn enough to really have fun!
“There’s no reason that adults shouldn’t snowboard and have as much fun as kids” says self-proclaimed Snowboard Evangelist Lauren Traub Teton who admits to being “in her 40s”. “I have been riding a snowboard for four years, and am having the most fun of my life!”
She feels that the only thing stopping “oldsters” (in their mid-30s and up) from embracing snowboarding in a big way are the inevitable hard falls experienced during the short steep learning curve. She says “there are easy ways to avoid the pain. They are just not well known.”
The reason “snowboard pain avoidance” is not more widely discussed has to do with the history of snowboarding. To some snowboarders, pain and injury are cool. This is obvious if you the read the hundreds of war stories on snowboard websites.
This viewpoint has its roots in the fact that snowboarding is stylistically a descendant of skateboarding and embraces some of the same traditions. For example, doing a grab, where the rider reaches down and grabs the board while airborne, is more of a necessity in skating than in snowboarding, because the skateboard is not attached to the feet. But grabs have morphed into a popular trick and a way to show style in snowboarding too.
The other tradition that has carried over from skating is the tradition of pain. In skateboarding, injury from accidental impact with the hard ground is a common occurrence and gives a skater bragging rights (as well as bruises and breaks.). A lot of skaters are also snowboarders, and so the tradition of absorbing pain as part of “paying dues” remains.
Another factor keeping some adults away from snowboarding may be the reputation for wildness on the slopes that snowboarders have. That probably comes from the fact that when the equipment was first invented, it was technologically primitive, with little ability to steer or stop. That’s how snowboarding got its image as an extreme sport and snowboarders got their reputation as outlaws of the snow. Now snowboards have evolved technologically into precision devices that can turn and stop easily, when operated under control.
With older snowboarders hitting the slopes, the culture of injury and pain has outlived it’s origins. Adults don’t equate injuries with status. People who start riding as adults want to stay upright and uninjured. Some skiers switch over because it seems like more fun and less stress on the knees. Again, the goal is to stay whole!
I learned by trial, error and luck how to avoid injury. In fact, a fine young gentleman working at the guest services desk on Whistler Mountain (B.C.) offered to let me borrow his Rollerblade wrist guards and knee pads, one day when I was learning, and I was hooked on safety and comfort from that moment.
Don’t make the two biggest mistakes new snowboarders often make when you do decide to take up this wonderful sport. To be safe, comfortable, and happy, you MUST
1. Take a lesson given by a professional your first time out.
and
2. You MUST wear padding, on your knees, butt, and wrists.
Come now, why try to reinvent the wheel? If you want to learn to snowboard, then a snowboard lesson with a trained instructor will teach you IMPORTANT basic snowboarding skills that you will use every day for the rest of your riding life.
So learn them right, right from the start. Forget about teaching yourself how to get on and off a lift safely on a board. This is what teachers are for.
And the padding is a must because falling is an inevitable part of the learning process. You WILL fall at first. But if you are padded properly, you will not have to hurt yourself. And don’t chuck the padding once you have mastered the basics. You will need it when you progress to jumping and tricks!
About The Author
For Lauren Traub Teton, snowboarding is the only sport she has ever been successful at. She loves to ride the halfpipe, race, and jump (a little!). She writes the popular free “Snowboard Szine” newsletter. Sign up for it on her site http://www.SnowboardSecrets.com SnowboardSecrets@aol.com

Building a Half Pipe For Snowboarding by: Jakob Jelling

Perhaps one of the most exhilarating things to snowboard on is a half pipe. A half pipe is a combination of gracefully arcs and glorious straight stretches that allow you to perform skateboarding tricks with your snowboard. The only other thing that can compare to a half pipe is a snowboarding bowl.
A half pipe is a ramp that is constructed partially with terrain and partially engineering snow placement. For this reason it may not be feasible for most people to build their own half pipe at home. Of course, where there is a will there is a way and for that reason we will look at the basics of how to build your own half pipe.
The first aspect to consider is the location of your half pipe. You wish to find a location where the terrain will reduce the amount of work that you must do. If you are trying to build a half pipe that is 6 feet high on flat ground you will need at least one full dump truck load of snow for each side of the ramp. If you happen to have 6 feet of snow or more you may be tempted to try to dig out your own ramp. Unfortunately the volume of snow you need to remove is even greater than that needed to build the contours.
The ideal solution is to find a spot where a small hill or bank can form one side or more of your ramp. Being able to use an existing detail of the terrain will greatly reduce the amount of work that you need to do. When looking for terrain features to work with keep in mind the basic details of any half pipe. A half pipe should be about 6 feet high, 8 feet across, have a flat surface about 8 feet long and a landing pad at the top of each ramp about 4 feet wide.
One of the most important details of a half pipe is the transition or curvature of the ramp. Getting the right curve is critical to the ride ability of your ramp. If the curve is too tight then your snowboard may not be able to flex enough to land securely and you will tend to fall or be off balance each time you land. If the curve is too gently then you will find the ramp to be slow and you will have a very hard time getting air. Following the edge of an imaginary circle that has a radius of 8 or 9 feet creates the ideal curve of a ramp. This is a fairly standard radius for any ramp regardless of how high the ramp is.
Another important consideration is the final construction of the ride surface and the maintenance of that surface. There is quite an art to constructing the best surface and many companies offer courses and tools for this purpose. The surface of your ramp is a combination of hard packed snow and ice. You want to have a solid surface that will not shift or break up when being ridden on but not solid ice either.
One way to help create a good surface is to layer snow with water and allow it to freeze. Your actual construction process will vary depending upon the type of snow you are working with and the temperatures. Begin by compacting a layer of about 12" of snow and then, if needed, misting water on top of the compact snow. As you mist the water on the compacted snow add another foot of snow so that it will adhere to the layer that you just created. The thickness that you will require will vary but 2 layers is usually a good start.
Building a snowboarding ramp can be a huge undertaking but is possible to do. With a little hard work, some training and the correct tools, you too will be able to build a reasonable half pipe.
About The Author
Jakob Jelling is the founder of http://www.snowboardinghelp.com. Please visit his website to discover the world of snowboarding!


This article was posted on August 16, 2005

funny stories

anyone got any funny snowboarding stories



spill the beans here


all your wacky snowboarding tales just list them here

snowboarding tips

Snowboarding Tips For BeginnersBy Dalvin Rumsey
Snowboarding is a very fun sport, given that you are at least a little familiar with the way a snowboard must be used. It is not hard at all, as once you get the hang of it, you will start to love snowboarding more than any other sport. If you are new to snowboarding, the first step is to find a snowboard that is the right size for you. The width and length of a snowboard are the key factor that will influence your performance. It would be very difficult, if not impossible to use a board that is not the right size for you. So, it would be great if you did some online research to find perfect board for you. There are several types of snowboards available on the market. Beginners should start by using the Freestyle boards, which are most popular among them, as learning to turn with the board is very simple. The Freeride boards can be used for a variety of snow types and terrains. The last type of snowboards, the Alpine or Race boards, is for professional snowboarders use only and are often used in competitions. Snowboarding is very much like skiing. In snowboarding, the movements involved and the way you move your body are very similar to skiing. You may be rather nervous the first time you position yourself, once you managed to do that, take a few deep breaths and relax your muscles. Tensing up increases your chances of getting an injury, so it is very important to stay relaxed! You must also never lock your knees. Make sure that you keep them slightly bent and relaxed, because they are the shock absorbers in this sport and going over bumps and divots is probably going to harm them. Once you are comfortable, strap in the other foot. You have to use your front foot to steer as you start going down the hill. While pressing your heel down, lift up your toe. Move your hips backward, and you are snowboarding! In order to stop, you just have to simply turn yourself, so that you are facing up the hill. This will slow you down and eventually stop you. This is about all it takes to become a snowboarder! Nevertheless, taking lessons would be the best idea one could have! Snowboarding is very exciting, so get on your board and enjoy! Article Source: http://articles.simplysearch4it.com/article/43347.html

The sexy shape of a snowboard by Jakob Jelling

Everyone knows that an hourglass figure turns heads. Not as many people know that the same figure is also behind the design of modern snowboards. While the hourglass figure on a snowboard doesn't turn heads as fast as a women's figure does it does help you to turn faster than any head can. The degree of side cut on a snowboard does effect its performance on the hill. The side cut radius is the size of the circle that is cut out of your snowboard. To put this into perspective, most skateboarding ramps have a radius of 9' and professional ramps as seen on TV will have a radius of 11'. As you can imagine, there is a definite curvature to the snowboard but it is subtle enough that it isn't always easy to spot. When a person first thinks about the side cut they may feel that it is a ploy by manufacturers to reduce the materials and thus cost of producing the snowboards. This can not be further from the truth. To understand side cuts you must think of why the map of the world has slices in it. A flat object can not proportionally represent a round object. For this reason a snowboard with a curve, or side cut, can turn faster and more aggressively than a snowboard that is straight along it's length. The reason that this is true is due to the way that the snowboard tries to bend and comfort to the surface that it is on when riding. When you turn your snowboard your weight and twisting causes the snowboard to flex and bend. The key to turning is to have the effective edge bite into the surface that you are riding on while being flexible enough to twist so that you can control the movement. A long straight line does not like to deviate from its basic shape but a curved line will meld with the hill and still have enough flexibility to bite into the surface as needed. When it comes time to purchase your snowboard you must think of its use and how it will react to the environment that it is exposed to. Proof of this fact comes when we think of surface area on a snowboard. A small side-cut radius means that more of the material has been cut out of the center of the snowboard. A large side-cut means that the cut is shallower thus leaving more surface area. So what difference does side cut make to the rider? Simple, more surface area means more pressure is spread out over a larger area, which leads to more potential energy and thus greater speed due to reduced friction. Basically if you want to go fast, and reduce your maneuverability, than you want a large side-cut in your snowboard. However, if you seek more control and sharper turning than you want a small side-cut in your snowboard. To many people snowboarding seems like an easy and simple past time that can be mastered in a very short amount of time. While it is true that snowboarding can be learnt in fairly short order there are many fine details that a snowboarder must pay attention to in order to achieve their peak performance. As you can tell from this even the seemingly minutest details can have a big difference. Jakob Jelling is the founder of http://www.snowboardinghelp.com. Please visit his website to discover the world of snowboarding! this article gleaned from www.freezinesite.com.

snowboarding..learning how to,,

Learning to snowboard is difficult just like any new thing that you may try. It will take time to learn, but by doing simple things and learning simple techniques, you will be snowboarding soon!
Learning how to snowboard can be difficult and certainly can be painful if you dont learn how to fall correctly. Before ever setting foot on a snowboard, you need to be aware that you are going to fall, and learn how to do it properly.
Taking beginning lessons is a good idea, because it will teach you the basic concept of falling. It may sound simple, but it will also teach you that the snowboard slides down the hill, and teach you to keep your balance on it. Once this is achieved, you can begin learning how to control the snowboard, and how to turn it. Shifting weight from the toe-side to the heal-side edges of the board is what is going to allow you to steer the snowboard. http://www.mountainsnowboarding.com/learntosnowboard/
One thing you might want to do before you ever go out to the hill is practice on the carpet first. If you set up your board and do some carpet riding in order to get used to standing on the board, it may help you be more comfortable out on the hill when you get started. Setting yourself up on the carpet will help you get used to your stance and practice with bending your knees before you are going down the hill.
It is easier on the carpet to change your stance to see if you are more comfortable riding goofy or regular (right foot forward = goofy, left foot forward = regular). It also gives you a chance to see which muscles you will be using and practice with pivoting and shifting your weight before the board is going to slide too much on you. Practicing on the carpet first will allow you to be comfortable with the board before you start your lessons up on the hill.
Its difficult to learn because one concept you need to be comfortable with is leaning down the hill. By nature, when we are being pulled down the hill, we want to lean back, but in snowboarding that isnt how it works. When snowboarding, you need to control the board with your front foot, putting your weight going down the hill.
Keys to learning the basics are remembering to keep you knees bent, and to look where you are going. Keeping your knees bent is going to help you relax and keep your balance going down the hill. Looking where you are going is the same as with a lot of things. If you look down, you are going to fall. Looking at your feet is not going to help your balance, but if you look to where you want to go, your feet can follow your eyes.
Getting out on the hill for the first time can be very scary, but also can be a lot of fun. Remember to wear the right clothing for the weather, so that you are warm and comfortable. If you are cold and wet, your snowboarding experience isnt going to be fun. Dressing in layers is recommended. Experienced riders can be fine out on the slopes in snowboarding pants and a sweatshirt, but for a beginning rider who may spend a lot of their time in the snow, layers are a good idea.
Also, remember to warm up your muscles and stretch before going out onto the hill. The experience can be ruined by pulling a muscle while going down the hill. Snowboarding is a physical activity, so it should be treated as one. Warming up and stretching before going out, but also not overdoing it on the first day. Snowboarding takes time, and trying to learn when you are exhausted will only make you more frustrated.
After the first day, it may seem as though you are never going to learn, but dont give up. Falling can be frustrating, but it happens to everyone. Given time and practice, youll be fine. Once you have the basics, youll be able to go wherever. Dont give up! It may take time to learn, but its worth it in the end. Snowboarding is a fun recreational sport that can be done by everyone. It can be a family event, or and event with friends.
Remember, time and practice is what it takes for you to become a good snowboarder. You are not going to be an expert right away. Snowboarding is more difficult to learn than skiing because balance is easier with speed. A person who is uncomfortable with snowboarding is typically uncomfortable with speed. However, once you overcome this fear, and learn the basics, snowboarding is easy to master. You will feel comfortable because you have learned to control the snowboard, and can feel free to explore the mountain or back country as you please.
Danielle Rose is a featured writer for http://www.mountainsnowboarding.com/, a site dedicated to providing info about Snowboarding. To learn more, visit our site. http://www.mountainsnowboarding.com/FJ/howtosnowboard/
Article Source: Article Hub

saturday 13 jan

working away today,i am a travel agent so see some good deals for snowboarding trips.

working 9-5 today on overtime as im saving for my next snowboarding holiday
to Slovenia,anyone reading this been there for snowboarding before?

gotta get back to work

all the best
Gazz

snowboarding

welcome to the extreme world of snowboarding!!for free tips about snowboarding all the snowboarding news and much much more,stay tuned to your snowboarding home.

snowboarding Italy

Lindsey Jacobellis: The End Of Snowboarding Innocence by: Terry McDermott
Lindsey Jacobellis flew into the frigid Italian atmosphere as a celebrated and admired snowboarding superstar but, after an adrenalin-fueled grab at her board in mid-flight, she returned to earth in a meteoric flameout destined to make her a lock for membership in the sports Bonehead Hall of Fame. But her gaffe also represents a watershed moment for a sport once typified by such actions.
Snowboarding is a serious sport populated by serious athletes. Participants in competitions throughout the world work and train and sacrifice to race and win and be recognized as the best in their sport. But the ascension of snowboarding from a wild, rebellious and carefree winter activity to a corporately-sponsored, mainstream, Olympic-level competition has resulted in attitudes and expectations that are radically divergent from the once-radical personality that dominated the sport.
Lindsey Jacobellis began snowboarding in rural Roxbury, CT when she was 10-years old. Coached by her older brother, Ben, Lindsey was forced to compete against boys since there was no girls’ division for the sport. This co-ed racing helped her develop a highly competitive spirit. Leading up to the Olympics she trained with the American men since she is the only U.S. woman competing in snowboard cross. She is, quite simply, the best women’s snowboard cross racer in the world. But, as a result of her fall in the Italian Alps, she will not be an Olympic champion in 2006.
What Lindsey Jacobellis will be, to many, is a showboating hot dog. She will be derided for being cocky, over-confidant and foolish. One television reporter stated that Lindsey had left a “blemish on the sport of snowboarding.” Another said that the “nation’s hope for a gold medal” in this event rested “solely on her shoulders.” Her agent is probably on suicide watch after seeing his dreams of gold medal endorsement deals get swept away in an avalanche of shattered dreams.
And how does Lindsey feel about all of this? "I went for the jump because I was having fun," she said. "Snowboarding is fun, and I wanted to share that with the crowd. ... I was caught up in the moment and forgot that I had to race.”
Poor Lindsey. Doesn’t she realize that competing at this level is not supposed to be fun? That getting “caught up in the moment” was a reckless, selfish and careless demonstration of naïve exuberance? How could Lindsey have been so irresponsible that she would have allowed the thrill of flying down a frosty hill, free, fast and in first-place by a snowboarding mile, to be manifested in a flamboyant maneuver for which snowboarders used to be hailed?
“Used to be…” That is the operative phrase at the moment. Snowboarding has come of age. Millions are watching world-class athletes compete for gold, silver and bronze. Fame and fortune await the winners. Only memories of a temporary place on the world stage await the rest. But Lindsey Jacobellis will forever straddle the chasm between Olympic winners and Olympic losers. She now carries the weight of Olympic silver around her neck and the stigma of Olympic failure on her competitive resume.
By her self-inflicted disaster, Lindsey Jacobellis has elevated snowboarding to a premier winter sport. No longer will the freewheeling, high-flying, “hey dude, watch this,” X Game-style mentality apply to competitive snowboarding. It’s about winning and money and national honor and endorsements. Getting ramped up and having fun are no longer permissible attitudes for the sport.
Dude, this is serious!
About The Author
J. Terrence (Terry) McDermott does not ski nor can he snowboard. He does, however, manage a website that offers tons of ski and snowboard equipment at SnowboardsandSkis.com. If he did snowboard, he hopes that he would share the same healthy perspective that Lindsey Jacobellis has so far demonstrated.
termcder@gmail.com


free articles and free downloads courtesy of article city.
http://www.articlecity.com

free articles and free downloads courtesy of article cityhttp://www.articlecity.com


The History of Snowboarding by: Rob Daniels
Over all, snowboarding has been a very fast growing sport. But it did have a rocky beginning. The history of snowboarding, however, tells the story of how the sport was evolved from a completely different human need. Many people didn't like snowboarding because snowboarders were mostly teenage males, and they were crazy on their boards. It started a prejudice among people that snowboarders are drug addicts and snowboarding is not a decent sport. Discrimination against them brought friction and, for a time, and the future of snowboarding was in jeopardy. The ski industry was vigilant about two things at the time: tight pants and skier safety; snowboarding would not meet either of these criteria. This rebel reputation is still common today in spite of the fact that snowboarding appeals to men, women, and children of all nationalities and social groups. To say who actually invented the sport of snowboarding would be impossible because people have always loved to slide down a snow-covered hill. Some feel that Jack Burchette began the history of snowboarding way back in 1929 by inventing the first snowboard, out of a plank of plywood. He has deeply influenced what snowboarding has become today. Plagued in the early years by the Snurfers reputation for unpredictability, snowboarding was outlawed at most ski resorts. At first, many ski resorts banned snowboarding at their mountains, but they eventually began to lift their ban and recognize snowboarding as a sport. Burton In 1980 Burton advances the history of snowboarding by developing the first real ski technology for snowboards. He produced several boards, and even got articles in the "Newsweek", "Playboy" and "Powder" which helped to make snowboarding better known. Burton also invented bindings with high backs to help control when snowboarding on hard packed snow. In 1983 Jake Burton holds the first national snowboarding championships. In 1985 the first magazine dedicated specifically to snowboarding hit the news stands with huge success and furthered the popularity of this exciting sport. Over the next 15 years, countless snowboard manufacturers were born and the sport of snowboarding began to change people's lives everywhere. A collection of snowboarding tricks and stunts was released on video in 1996. The film, carried by its imaginative scenario, spanned the globe, spreading the message of snowboarding. Vermont played a large part in the early days of snowboarding. Vermont was the first state to open a Snowboarding Park, where snowboarders were welcome to do their thing. Olympics Even though the-history-of-snowboarding is short in the Olympics it is remembered with controversy and excitment. The not-so-new sport of snowboarding was finally recognized and meant a huge victory for serious snowboarders across the globe. Olympic and world wide snowboarding events are among the most popular of winter sports and the competition to be the best is fierce. Many people had heard of snowboarding before the Olympics, but never had so many people avidly watched and followed a snowboarding competition. Initially Olympic snowboarding was divided into four competitions with two categories: men's and women's halfpipe and men's and women's giant slalom. Now there are more events for snowboarding like slalom, big air, racing, boarder cross and halfpipe. Now that snowboarding has it made it to the Olympics, snowboarding is accepted worldwide into the mainstream populace. Arguably, snowboarding is the fastest growing sport and industry. As snowboarding gained popularity it also gained approval and now sections of some mountains are dedicated exclusivly to them. Yet, despite the stigmas and lack of good taste, snowboarding prevailed on into the nineties and still continues to grow. In a short 40-year history, snowboarding has cemented itself into the hearts and minds of enthusiasts around the world . 80% of the kids that take up a winter sport, pick snowboarding and wonder snowboards are the number one Christmas present. And it is widely predicted that snowboarding will become more popular than skiing by the year 2015.
About The Author
Rob Daniels is a lifelong sports enhusiasts and snowboarder. More articles by Rob can be found at Goofy Snowboarding http://www.goofy-snowboarding.com and Kayak Escape http://www.kayak-escape.com.

footwear

Snowboard Boots: Make The Right Choice
Since it is your feet that connect you to your board the correct boots are vital for achieving maximum board control and general boarding enjoyment. There is nothing worse than having sore, wet and cold feet which will without doubt ruin a day out on the hills. When seeking to buy the best boots possible you should select those that suit the style of riding that you believe you are most likely to adopt.Three varieties of snowboard boots are available: the hard boot, the soft boot and the hybrid boot. What tends to change the most is the exterior of the boots, the inner linings remaining pretty much the same between each boot type. Inner bladders are the liners found on the inside of all snowboard boots which cushion and support your feet. They wick water away from your feet, keeping them warm and dry. The inner bladder tends to have its own laces incorporated which function to tightly wrap the liner securely about your feet. This ensures no movements/ rubbing which could damage skin. Additionally it allows the wearer to adopt the tightness of fit to their desired comfort levels.Hard snowboard boots, have, as the name implies, a generally less flexible tough/ rigid outer layer(s) that seek to promote increased control with relation to body movement and boot performance. These boots are typically only used on-piste in events like slalom and sometimes boardercross where small movements of the participants feet translate into greater edge performance/ board responsiveness than would be achieved in softer snow offpiste conditions. These boots additionally support your ankle, foot and lower leg well, with the outer shell typically made from hard plastic. A small degree of flexibility is frequently supplied via such modifications as hinges, many found on the ankle sections. As can be imagined, ski boots have had a large influence in their design. This type of boot tends to have toe and heel clamps to secure the boot to the board.At the other end of the snowboard boot spectrum are the soft boots. These are by far the most comfortable boots available, various forms existing. Soft boots can be used in conjunction with binding highbacks for increased control on your heel edge. Flow-in bindings exist, where the boot (typically very lightweight and slim) is secured by a large cushioned plate placed over the top, ratcheted down. Another type of soft boot allows the wearer to step in or out of the binding with relative ease, small but strong plastic gripping points existing about the arch (or other area) which the bindings click and grip on to when stepped on. A simple release mechanism lets go of the boot. Since the boots are soft they allow the wearers feet to move more naturally and in comfort, therefore are best suited to freestyle. Heavy landings on hardpack require the body to bend and absorb, something not entirely possible with harder boots. Most people choose this boot type as other daily movements like walking and even quick trips out in the car are possible with them on.Hybrid snowboard boots contain elements from both the hard and soft boot technology to provide typically give a sturdy hard sole and softer upper boot. A mix of flexibility and comfort alongside a good deal of control characteristic of hard boots is achieved.When in shops trying on boots (by far the best way to asses fit) it is a good idea to take with you the footwear and leggings that you will be wearing on the slopes. This enables the correct sized boot to be fitted, reducing the purchase of a boot that could be too small. Small boots can have painful problems such as making leggings pinch your skin or crunching up your toes which can be painful when landing tricks. Walk around the shop in the boots, run, jump, crouch, do all the moves you can imagine are required when snowboarding to see if they are comfortable and how much support is offered. Remember, small problems at this point could become a huge problem on the ski slopes. Finding a pair of similar boots in a ski resort is often difficult and can be pricey. If all these basic points are adhered to many days of snowboarding bliss await! Many boots today have various so called ‘enhancements’ like air cushions, gel/ heat moulding inner liners (can be very good, especially for unusual shaped feet). Try as many boots out to see what they’re like. Ask people who have done the same, basically build up a good idea before you buy. Boots are the most important aspect of a boarders hardware, get them right and you’ll be able to improve your riding in leaps and bounds.Snowboarding is an immense amount of fun. To learn more about snowboard wax go to http://www.snowboardwax.info .


free articles and free downloads courtesy of Article Avenue

http://www.articleavenue.com)

Submitted by DarylMarly on Friday, August 11 @ 05:52:29 EDT

snowboarding

welcome to the extreme world of snowboarding!!for free tips about snowboarding all the snowboarding news and much much more,stay tuned to your snowboarding home.